0001 <?xml version="1.0" ?>
0002 <endurox>
0003 <appconfig>
0004 <!-- ALL BELLOW ONES USES <sanity> periodical timer -->
0005 <!-- Sanity check time, sec -->
0006 <sanity>15</sanity>
0007 <!-- If process have been state changed to other than dead, exit or not running
0008 but PID of program does not exists in system, then send internel message, then
0009 program have been stopped.
0010 In Seconds.
0011 -->
0012 <checkpm>5</checkpm>
0013 <!-- <sanity> timer, end -->
0014 <!-- Do process reset after 1 sec -->
0015 <restart_min>1</restart_min>
0016 <!-- If restart fails, then boot after +5 sec of previous wait time -->
0017 <restart_step>10</restart_step>
0018 <!-- If still not started, then max boot time is a 30 sec. -->
0019 <restart_max>30</restart_max>
0020 <!-- <sanity> timer, end -->
0021
0022 <!-- Time after attach when program will start do sanity & respawn checks,
0023 starts counting after configuration load -->
0024 <restart_to_check>20</restart_to_check>
0025 </appconfig>
0026 <defaults>
0027 <min>1</min>
0028 <max>1</max>
0029 <autokill>1</autokill>
0030 <respawn>1</respawn>
0031 <!-- The maximum time while process can hang in 'starting' state i.e.
0032 have not completed initialization, sec -->
0033 <start_max>20</start_max>
0034 <!--
0035 Ping server in every X seconds (minimum step is <sanity>).
0036 -->
0037 <pingtime>9</pingtime>
0038 <!--
0039 Max time in seconds in which server must respond.
0040 The granularity is sanity time.
0041 -->
0042 <ping_max>40</ping_max>
0043 <!--
0044 Max time to wait until process should exit on shutdown
0045 -->
0046 <end_max>30</end_max>
0047 <!-- Interval, in seconds, by which signal sequence -2, -15, -9, -9.... will be sent
0048 to process until it have been terminated. -->
0049 <killtime>20</killtime>
0050 </defaults>
0051 <servers>
0052 <server name="tpevsrv">
0053 <srvid>10</srvid>
0054 <mindispatchthreads>5</mindispatchthreads>
0055 <maxdispatchthreads>5</maxdispatchthreads>
0056 <sysopt>-e ${TESTDIR}/tpevsrv-dom1.log -r</sysopt>
0057 </server>
0058 <server name="atmisv4_1ST">
0059 <srvid>50</srvid>
0060 <sysopt>-e ${TESTDIR}/atmisv4_1ST-dom1.log -r</sysopt>
0061 </server>
0062 <server name="atmisv4_2ND">
0063 <srvid>51</srvid>
0064 <sysopt>-e ${TESTDIR}/atmisv4_2ND-dom1.log -r</sysopt>
0065 </server>
0066 <server name="tpbridge">
0067 <max>1</max>
0068 <srvid>101</srvid>
0069 <sysopt>-e ${TESTDIR}/tpbridge-dom1.log -r</sysopt>
0070 <appopt>-f -n2 -r -i 127.0.0.1 -p 20001 -tA -z30</appopt>
0071 </server>
0072 <server name="tpbridge">
0073 <max>1</max>
0074 <srvid>102</srvid>
0075 <sysopt>-e ${TESTDIR}/tpbridge-dom1.log -r</sysopt>
0076 <appopt>-f -n3 -r -i 127.0.0.1 -p 22002 -tA -z30</appopt>
0077 </server>
0078 </servers>
0079 </endurox>