0001 <?xml version="1.0" ?>
0002 <endurox>
0003 <appconfig>
0004 <!-- ALL BELLOW ONES USES <sanity> periodical timer -->
0005 <!-- Sanity check time, sec -->
0006 <sanity>1</sanity>
0007 <!-- If process have been state changed to other than dead, exit or not running
0008 but PID of program does not exists in system, then send internel message, then
0009 program have been stopped.
0010 In Seconds.
0011 -->
0012 <checkpm>5</checkpm>
0013 <!-- <sanity> timer, end -->
0014 <!-- ALL BELLOW ONES USES <respawn> periodical timer -->
0015 <!-- Do process reset after 1 sec -->
0016 <restart_min>1</restart_min>
0017 <!-- If restart fails, then boot after +5 sec of previous wait time -->
0018 <restart_step>10</restart_step>
0019 <!-- If still not started, then max boot time is a 30 sec. -->
0020 <restart_max>30</restart_max>
0021 <!-- <sanity> timer, end -->
0022 <!-- Time after attach when program will start do sanity & respawn checks,
0023 starts counting after configuration load -->
0024 <restart_to_check>20</restart_to_check>
0025 <!-- Send full service table every 5 seconds -->
0026 <brrefresh>5</brrefresh>
0027 <!-- Reload DDR time (1x sanity loop) -->
0028 <ddrreload>1</ddrreload>
0029 </appconfig>
0030 <defaults>
0031 <min>1</min>
0032 <max>1</max>
0033 <autokill>1</autokill>
0034 <!-- Do not need respawning! -->
0035 <respawn>1</respawn>
0036 <!-- The maximum time while process can hang in 'starting' state i.e.
0037 have not completed initialisation, sec -->
0038 <start_max>20</start_max>
0039 <!--
0040 Ping server in every X sanity units
0041 -->
0042 <pingtime>9</pingtime>
0043 <!--
0044 Max number of sanity units in which server must respond.
0045 The granularity is sanity time.
0046 -->
0047 <ping_max>40</ping_max>
0048 <!--
0049 Max time to wait until process should exit on shutdown
0050 -->
0051 <end_max>30</end_max>
0052 <!-- Interval, in seconds, by which signal sequence -2, -15, -9, -9.... will be sent
0053 to process until it have been terminated. -->
0054 <killtime>20</killtime>
0055 </defaults>
0056 <servers>
0057
0058 <server name="atmi.sv84">
0059 <min>1</min>
0060 <max>1</max>
0061 <srvid>10</srvid>
0062 <envs><env name="NDRX_RTGRP">DOM1</env></envs>
0063 <sysopt>-G -e ${TESTDIR}/atmisv-dom2.log -r -sT2:TESTSV</sysopt>
0064 </server>
0065
0066 <server name="tpbridge">
0067 <max>1</max>
0068 <srvid>101</srvid>
0069 <sysopt>-G -e ${TESTDIR}/tpbridge-dom1.log -r</sysopt>
0070 <appopt>-f -n2 -r -i 127.0.0.1 -p 20003 -tA -z30 -P0</appopt>
0071 </server>
0072
0073 </servers>
0074
0075 <services>
0076 <service svcnm="TESTSV" routing="RT1" />
0077 <service svcnm="T2" routing="RT2" />
0078 </services>
0079
0080 <routing>
0081
0082 <!-- long routing -->
0083 <route routing="RT1">
0084 <field>T_DOUBLE_2_FLD</field>
0085 <ranges>
0086 MIN--1.80:DOM1
0087 ,-1.1:DOM2
0088 ,1.2:DOM1
0089 ,1.01-1.02:DOM2
0090 ,5.5-MAX:*
0091 </ranges>
0092 <buftype>UBF</buftype>
0093 </route>
0094
0095 <!-- Default route ... -->
0096 <route routing="RT2">
0097 <field>T_LONG_2_FLD</field>
0098 <ranges>
0099 100-200:DOM3,*:*
0100 </ranges>
0101 <buftype>UBF</buftype>
0102 </route>
0103
0104 </routing>
0105 </endurox>
0106
